Dear Sudo Room,
Here's your invoice! We appreciate your prompt payment.
Thank you for stewarding the commons.
Love and solidarity,
Omni Commons
------------------------ Pledge Summary --------------------------
Invoice # : 1202
Invoice Date: 10/01/2017
Due Date: 10/25/2017
Terms: Net 25
Amount Due: $2,000.00
The complete version has been provided as an attachment to this email.
---------------------------------------------------------------------
I got new "bandsaw tires" and installed them in the sudoroom bandsaw, and
installed them, but i haven't tested it.
someone who feels confident should go ahead and test it. i set the blade
tension as a guess so i don't know if it's right.
also we still need a 1.5" square plate (0.125" thick) for the hole in the deck
where the blade goes through.
-jake
Does anyone happen to have a 208V transformer sitting around, or know where
to best get one?
We have a new (old) centrifuge that requires 14A @ 208V. We currently have
it plugged in to our spare 230-240V outlet. Most equipment can handle +/-
10% of rated voltage, but that is likely decrease its lifespan over the
long term.
For the unenlightened, 208V is two phases of a 3-phase system. We have the
more usual 2x120V circuit instead. See
https://ctlsys.com/support/electrical_service_types_and_voltages/
Thanks!
Patrik
---------- Forwarded message ----------
Date: Fri, 15 Sep 2017 02:47:30 +0000 (UTC)
From: Eric Reiter <unquant(a)yahoo.com>
Hello Counter Culture and Sudo-room people. My current research effort is
toward electromagnetic medicine. In past years I automated an enzyme reaction
and applied tuned electromagnetic fields, from radio-frequency to ultraviolet
in search for a non-thermal reaction rate effect. Now I am concentrating on
millimeter wave tuning to promote a gene expression or enzyme reaction. I seek
collaboration with a biologist to perform experiments in-vitro and later
in-vivo. I plan to visit Counter Culture Lab this Tuesday evening and will
elaborate on my resources and strategy. Attached is the microwave enzyme
stimulator under construction in my lab. I have additional projects that are
developed but beg for collaboration: Resolution of wave-particle duality (this
worked, see link), ultimate connectors, slanted spine bookbinding, and musical
instrument inventions.
Thank You,
Eric Reiter
Pacifica CA
650 738 9255
website: Resolution of Wave-particle Duality - Threshold Model Physics - Unquantum Effect
Experiments and theory toward resolving the wave-particle-duality problem in quantum mechanics.
http://unquantum.net/
We need to demo the wooden bookcase in the far corner of sudo bordering ccl
and move two of the cabinets in there. They've already been cleared off and
sorted. There's a lot of junk to move to trash or my car for an ewaste run
tmrw. Right now just me n robb hustlin. If anyone's got a cycle in them to
demo, move the cabinets and/or clean, would be hella rad!
Do you have any reference links for the upgrades? We have the same over at
Sudo and I've noticed it's pretty inconsistent. Wondering if we should
pursue upgrading as well.
On Thu, Sep 14, 2017 at 6:50 PM, Travis Briggs <audiodude(a)gmail.com> wrote:
> I think the list for discussion of lists themselves is:
>
> rack(a)lists.noisebridge.net
>
> Cheers,
> -Travis
>
> On Thu, Sep 14, 2017 at 5:40 PM, Revolt <revoltrightnow(a)gmail.com> wrote:
>
>> A while back I bought some parts and did some research on how to
>> upgrade NB's reflow ovens.
>>
>> Now that I can enter the space again, I met up with Nick last night
>> and we hacked on one for hours. This is the result:
>>
>> mediafire.com/file/h8thuawah97gldg/Firmware%20upgrade%20for%
>> 20T-962A%20Reflow%20NB%20with%20Nick.mp4
>>
>> -Zach
>>
>> P.S. is there any way to upload videos to the NB wiki?
>>
>> P.P.S. sorry to keep double posting to the list, but my emails keep
>> bouncing from my hotmail addy (and my yahoo before that). Anyone know
>> who the admins are for NB Discuss?
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss(a)lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss(a)lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
Hi everyone,
A final update/reminder for this weekend's activities.
The Bookfair and Bastard conference will be using the entrance hall and
ballroom this weekend and those spaces need to be completely clear to
fit the bookfair tables. I'll be working on moving stuff today and
tomorrow if anyone has some time to help out. Message or email me to
find out when I will be at the Omni. The set up crew from the Bookfair
will be here Friday night.
These events are a great opportunity for collectives to share info with
activists. Omni doesn't have an official table, but Julian has
volunteered to coordinate one that will be located somewhere else in the
building. Thanks Julian! He sent an email about this a day or so ago.
Please be in touch with him to take a tabling shift or give him
materials from your collective that you would like to have at the table.
I would love to see some kind of activities going on in Sudo and CCL to
showcase what you all are doing.
Collectives and related groups that DO have Bookfair tables are Phat
Beets, TIL, GWS, Stinney Distro. FNB will be serving. If you are
interested inn helping any of them with their tables, please contact
them directly.
If you would like to help out with Omni tasks during the Bookfair, let
me know. If you want to help during BASTARD Conference, Katrina is the
point person.
- Laura
Me thinks they'd be best between sudo/ccl. Maybe put combo lock on one for
active projects
On Sep 14, 2017 12:26 PM, "Adam" <me(a)adammunich.com> wrote:
I may be able to make it buy sunday, definitely tuesday.
It's probably easier to put them in the basement until we figure out where
they should go in sudo. Against the back wall? Replace the dividing wall
between sudo and ccl? Where should the material stock go, where the wire
rack is now? So many questions :-)
- - - - Begin automatically generated footer - - - -
I seek to understand, and aim to create.
Weblog: http://adammunich.com
PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
On Thu, Sep 14, 2017 at 8:38 AM, robb <sf99er(a)gmail.com> wrote:
> though i know they can't stay there long, we may have to move em to the
> basement if we can't get them all placed in sudo by tomorrow.
> i don't want to disturb the javascript meetup
>
> On Thu, Sep 14, 2017 at 8:14 AM, Jenny Ryan <tunabananas(a)gmail.com> wrote:
>
>> They are in the entrance hall and we will need to get them into sudo by
>> tomorrow (bookfair setup).
>>
>> Work party tonight, anyone?
>>
>> On Sep 12, 2017 10:13 PM, "Adam" <me(a)adammunich.com> wrote:
>>
>>> I'd say let's get all of them, we'll keep extras in the basement if we
>>> don't need them all immediately.
>>>
>>> Otherwise it'll be a more than a hundred dollars each to buy more later.
>>>
>>>
>>> - - - - Begin automatically generated footer - - - -
>>>
>>> I seek to understand, and aim to create.
>>> Weblog: http://adammunich.com
>>>
>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
>>>
>>> On Tue, Sep 12, 2017 at 12:27 PM, robb <sf99er(a)gmail.com> wrote:
>>>
>>>> Picking up cabinets today. Do we want all 6?
>>>>
>>>> On Aug 23, 2017 10:46 PM, "Adam" <me(a)adammunich.com> wrote:
>>>>
>>>>> Flat-bed trailers from u-haul are approximately $20 and don't charge
>>>>> for miles.
>>>>>
>>>>>
>>>>> - - - - Begin automatically generated footer - - - -
>>>>>
>>>>> I seek to understand, and aim to create.
>>>>> Weblog: http://adammunich.com
>>>>>
>>>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
>>>>>
>>>>> On Wed, Aug 23, 2017 at 9:35 PM, <hol(a)gaskill.com> wrote:
>>>>>
>>>>>> oh man that might not work w/ my work for next friday. I used to
>>>>>> commute to belmont and it could be 1-1.5 hour one way in traffic. I'll
>>>>>> confirm one way or other on monday. If I can swing it timewise I'm happy
>>>>>> to drive or ride along as a loader if we don't find a trailer.
>>>>>>
>>>>>> On 2017-08-23 18:50, robb wrote:
>>>>>>
>>>>>> cabinets are in portola valley...1 hr drive
>>>>>>
>>>>>> On Wed, Aug 23, 2017 at 2:46 PM, niki <niki.shelley(a)gmail.com> wrote:
>>>>>>
>>>>>>> Y'all can borrow my truck if needed.
>>>>>>>
>>>>>>> On Wed, Aug 23, 2017 at 10:10 AM <hol(a)gaskill.com> wrote:
>>>>>>>
>>>>>>>> From talking to folks last night it sounded like those books are
>>>>>>>> pretty actively used so while it makes sense to move them out of the shop
>>>>>>>> area, they shouldn't move too far.
>>>>>>>>
>>>>>>>> Also who has or has access to a light flatbed trailer? I can pick
>>>>>>>> up up next friday afternoon if a trailer and one or 2 people can come along.
>>>>>>>>
>>>>>>>> On 2017-08-22 13:08, Adam wrote:
>>>>>>>>
>>>>>>>> Why not move the books to the front room? It was quite charming
>>>>>>>> having a reading area there in the beginning.
>>>>>>>>
>>>>>>>> On Aug 22, 2017 12:36 PM, <hol(a)gaskill.com> wrote:
>>>>>>>>
>>>>>>>>> if anyone has access to a light trailer in good condition we could
>>>>>>>>> borrow, I can finish my hitch install (we're just down to the harness) in
>>>>>>>>> time to tow it next Friday.
>>>>>>>>>
>>>>>>>>> On 2017-08-19 10:19, robb wrote:
>>>>>>>>>
>>>>>>>>> ok, we're set to pick em up around the 1st of sept
>>>>>>>>> if anyone has a vehicle that we can use to transport them, plz,
>>>>>>>>> let the list know :)
>>>>>>>>> otherwise, Barbara will have to pay for renting a truck :(
>>>>>>>>> we'll need another person, besides me, to help get them in the
>>>>>>>>> truck too
>>>>>>>>> cheers
>>>>>>>>>
>>>>>>>>> On Fri, Aug 18, 2017 at 4:33 PM, Adam <me(a)adammunich.com> wrote:
>>>>>>>>>
>>>>>>>>>> Re-Joined list;
>>>>>>>>>>
>>>>>>>>>> Anyway yes, I checked out these cabinets and overall they look
>>>>>>>>>> pretty solid. They would be very ideal for storing parts in, as well as
>>>>>>>>>> flammables which probably shouldn't be left out... (eg, oils, alcohols).
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> - - - - Begin automatically generated footer - - - -
>>>>>>>>>>
>>>>>>>>>> I seek to understand, and aim to create.
>>>>>>>>>> Weblog: http://adammunich.com
>>>>>>>>>>
>>>>>>>>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> sudo-discuss mailing list
>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> sudo-discuss mailing list
>>>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>> sudo-discuss mailing list
>>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> sudo-discuss mailing list
>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>
>>>>>>>
>>>>>
>>>
>>> _______________________________________________
>>> sudo-discuss mailing list
>>> sudo-discuss(a)lists.sudoroom.org
>>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>>
>>>
>
Re-Joined list;
Anyway yes, I checked out these cabinets and overall they look pretty
solid. They would be very ideal for storing parts in, as well as flammables
which probably shouldn't be left out... (eg, oils, alcohols).
- - - - Begin automatically generated footer - - - -
I seek to understand, and aim to create.
Weblog: http://adammunich.com
PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
