there is a small offset printing press in sudoroom which is never going to be
used here, and will probably end up getting thrown out or recycled if it
doesn't go somewhere.
It's an Adana Five-Three and they can be quite valuable:
http://www.briarpress.org/40882
of course ours isn't as polished as this one in the picture, but it's basically
the same thing. The wood base is not flawless, but the rollers seem soft and
new and the action of the whole thing is smooth.
does anyone want to handle getting this thing out of sudoroom? Perhaps you can
sell it and donate some of the money back to sudoroom to keep the lights on?
thank you,
-jake
Is the Sudo Humans account management system no longer working?
sudoroom.org/humans right now just forwards to a "Page NOT Found".
That means CCL is not able to add any new members, we can't check who is
paying their membership fees, existing members are not able to update their
payment information, etc...
Help!
Patrik
sudoroom wont have another meeting before the next delegates meeting
plz, read, comment, provide concerns/questions if you will
proposal:
This is a GCEA draft proposal, which could be amended, based on feedback
from the delegates at this meeting. Thank you for taking the time to
discuss this proposal.
GCEA as an organization is working to establish itself on firm economic
grounding. Unfortunately this has meant that GCEA hasn't been able to pay
its rent for 5 months of 2018, as well as currently in 2019. GCEA feels
that there is strong value for both parties in the relationship between
GCEA and the Omni, and hopes that the Omni collectives feel the same way.
To this end, we are making this proposal to change the status of GCEA's
rent payment.
As an Omni collective organization, GCEA members appreciate the other Omni
collectives’ willingness to work with us as we solidify our financial
situation.
1) GCEA would like to pay its existing back rent to the Omni and is
planning to conduct fundraising event to that effect. We propose that GCEA
be able to pay the back rent at its normal rate, and propose that the Omni
waive the late fees on rent payment. We believe this to be consistent
behavior with many Omni collectives.
1a) GCEA organized a fundraising event, Out The Blue, on December 7th, 2018
in partnership with several University alumnae orgs and groups. We expected
a portion of the funds ($1,100) to go towards GCEA's rent/youth trip to
Africa. This portion would have covered our back rent from 2018 completely.
We have been informed, after the fact, that the rules of the Commons Group
prevent the funds from this event from going towards GCEA's rent. We
believe this is a miscommunication and intend to have a conversation with
the Common's Group in hope that our portion of the funds be allocated
towards GCEA's rent. We will be appreciative if that happens, but if not
GCEA intends to hold another fundraising event in order to pay for its back
rent.
2) GCEA would like to propose that the rent be reduced to one dollar, for
the ongoing period. We hope to be able to return to a larger rental rate
in the future, but are having difficulty meeting this need right now. We
understand that there is some precident in Omni history for an organization
to have one dollar rent.
2a) We understand that there are organizations that exist at the Omni who
make payments largely through paying a percentage of their donations
directly to the Omni, rather than a monthly rent. GCEA would like to
propose that it continue to support the Omni financially by giving a
portion of its income from fundraisings and donations to the Omni. We
would like to discuss that level with the Omni. Internally we have
discussed numbers around 30-50% of GCEA donations, but are happy to discuss
the appropriate level for this with the Omni Delegates.
3) GCEA has limited funds at the moment, but wants to continue contributing
to the Omni Commons as much as it is able. To this end GCEA would like to
propose that it take on a distinct project for the Omni. We have
brainstormed an project: to take responsibility for a renovation of the
Disco Room. This would involve organizing and taking responsibility for
creating a working group to hold the meetings, organizing fundraising
efforts (which should be easier as an Omni project, than direct GCEA
fundraising), managing volunteer contractors, seeking input from the Omni
Community, and ensuring that all legal regulations are followed.
4) The delegates have previously approved that GCEA and BAPS have priority
use for the Small Classroom. Recently, some delegates requested that the
lock be removed from the Classroom door. GCEA, in conversation with BAPS,
propose to convert the small classroom from fully common space to
semi-common. We propose to keep the door locked, in order to establish
accountable common access to the room, and to keep it secure and clean.
However, we seek to make the room available to any group that makes a
reasonable request, except when GCEA or BAPS is already using the space.
Please note additionally that we encourage that the Ticketbooth room be
made more accessible to fully common use as soon as possible.
Thank you delegates for taking the time to consider this proposal. We
welcome your thoughts and questions, and hope to be able to return at the
next delegates meeting with a m ore formalized and informed proposal.
We could make an Electrical Discharge Machining setup at Sudoroom pretty
easily.
https://www.wired.com/story/gaze-upon-the-black-magic-of-electrical-dischar…
at sudoroom, we have an old CSAM (Confocal Scanning Accoustic Microscope) in
the corner which is basically an extremely precise 3-axis CNC machine with a
granite base (for stability) and a liquid tank below the toolhead where the
CSAM used to happen. (attached picture is somewhat similar to what we have)
We still have all the old CSAM stuff (including the ultrasonic pickup and
amplifier) but the software on the old computer (RUNNING WINDOWS 95) barely
works and probably is not worth resurrecting, besides who cares about CSAM?
The point being that we could pretty easily put a piece of metal in a clamp
attached to the toolhead and move it through a stationary brass wire in a
distilled-water bath, and thus be able to do 2-dimensional Electrical Discharge
Machining pretty easily. We could cut flat stencils and even make thick stuff.
I believe we could also do conventional 3-axis CNC machining with the same
idea, if the toolhead held a conductive point and just machined away at the
material from above. EDM is slow, but doesn't pollute the air with fumes or
even noise, so it would be fine to just leave it going overnight or even during
meetings.
I don't have any experience or detailed knowledge of EDM but I could certainly
get the motors of this CNC machine working and i know how to pour distilled
water, and could probably hook up the appropriate high-frequency power supply
between the brass electrode and the work, if other people are interested in
bottomlining this process.
-jake
On Wed, Jan 16, 2019 at 10:37 AM Yardena Cohen <yardenack(a)gmail.com> wrote:
> We've been paying for Sudoroom's Gandi & Digitalocean using a debit
> card with Matt Senate's name on it, which expires this month. Is there
> a newer/better form of payment I can add?
Escalating this to sudo-discuss as we really need an answer soon. Thanks.
not enough $ for said duties but good 1st step towards sustainability
On Fri, Feb 8, 2019 at 2:10 PM Adam <me(a)adammunich.com> wrote:
> I vote in favor
>
> - - - -
> Weblog: http://adammunich.com
> With great power comes great responsibility.
>
>
> On Fri, Feb 8, 2019 at 1:08 PM Kyle Mitchell <kyle(a)kemitchell.com> wrote:
>
>> I've been absent from Sudo for the past few months, but worked directly
>> with Jenny on records for Sudo in connection with the original
>> application for determination of tax-exempt status, on finance and other
>> matters. My experience was very good. I encouraged her several times
>> over the years to take pay for the extensive work she does, and I'm glad
>> to see her do so now.
>>
>> My only concern is that $25 is less than twice the Oakland minimum wage,
>> which is itself amorally low.
>>
>> I represented Sudo pro bono for several years. I don't doubt that
>> decision. But when other counsel became available, for pay, to handle
>> the merger and building acquisition, I stepped aside, for several
>> good reasons.
>>
>> Unlike for-profit orgs, it's perfectly fine for nonprofit orgs to take
>> volunteer and pro bono services. But when services can't be both pro
>> bono and sustainable, they ought to cost what they cost. Even the best-
>> intentioned orgs tend to forget about discounts, treat all paid
>> providers as if they were paid properly, and then suffer surprise and
>> disruption when the underlying unsustainability resurfaces.
>>
>> In the end, there's a budget, and dollars in have to balance with
>> dollars out. Omni runs lean, I'm sure. However things pan out, I'd
>> encourage all involved to keep tabs on the other balances inherent in
>> any good service relationship.
>>
>> --
>> Kyle Mitchell, attorney // Oakland // (510) 712 - 0933
>> _______________________________________________
>> sudo-discuss mailing list
>> sudo-discuss(a)lists.sudoroom.org
>> https://sudoroom.org/lists/listinfo/sudo-discuss
>>
> _______________________________________________
> consensus mailing list
> consensus(a)lists.omnicommons.org
> https://omnicommons.org/lists/listinfo/consensus
>
